top of page

Automated Homogenizers

Automated Homogenizers are perfect for researchers needing to homogenize/mix/blend a large number of samples per day. Automated Homogenizer Systems allow for many samples to be homogenized simultaneously and/or during one processing run period, which reduces researcher time and labor involved in homogenizing as well as provides consistent results and eliminates the risk of cross-contamination. Automated Homogenizer Systems consist of two models, Multi-Prep Rapid Homogenizer and DPS-20 Dual Homogenizing System.

Multi-Prep Rapid Homogenizer

QHS-66 -1.jpg

​

The Multi-Prep Rapid Homogenizer streamlines sample processing with automated, high-throughput homogenizing — up to 6 samples at once and up to 300 per hour. Its programmable system stores up to 10 custom protocols, while manual mode allows for quick, individual runs when needed.

​

  • Automated multi-sample homogenizing

  • Compact design, occupies small footprint

  • Process up to 6 samples at the same time

  • Store up to 10 different programs

  • Easy load tube racks, 5ml-50ml tubes*

  • Can perform 60 oscillations per minute

  • Automated engagement & disengagement

  • Avoiding cross contamination

  • Made in the USA with 2 Year Warranty

  • Generator probe not included

  • All accessories are sold separately

​​

Requires a 12-Pack of Multi-Prep Probes and Spider Tube Rack. Probes and Rack are sold separately. PRO Homogenizing Equipment is made in the USA. Includes a 2 Year Limited Warranty coverage on the majority of components. 

Multi-Prep Rapid Homogenizer

Specifications

Dimensions: 10.6 X 14.6 X 14.5 inch
Weight: 42lbs / 19kg
Speed Control: 2000 - 18000 RPM
Power Rating: 805 Watts
Tube Processing Range:
Sample volume Minimum: 2ml for 7mm Probe/3ml for 10mm Probe**
Noise rating: 68 dB
Program Mode: 10 Complete running programs can be stored
Oscillation: ON/OFF Keypad Selectable

*Depends on tube dimentional size
**Non-Oscillating Mode will reduce the minimum volume of each tube. If using Oscillating Mode, sample volume minimum must be increased by additional 3ml.

Dual Homogenizing System

DHS-220 (2).jpg

 

 

​The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations:
 

- Automated Ultrasonic Homogenizing System

- Automated Mechanical Homogenizing System

- Automated Mechanical and Ultrasonic Homogenizing System

​

This advanced system allows the maximum in choice and control to best support your processing needs. The DPS-20 merges the advantages of each homogenizing method to make it the optimum timesaving and flexible homogenizing system on the market. Mechanical or ultrasonic homogenizing can be used together or independently of each other. It leads to a faster and more efficient sample breakdown with minimal or no heat introduced, and more precise particle size reduction, all within a noise reducing enclosure. Its automation capability allows for repeat processing and consistent results, freeing up time for other work in the laboratory.

​

Dual Processing System

Ultrasonic Precision & Rapid Multi-Sample Processing

​​​​​

  • A high-performance brushless motor powers the mechanical homogenizer while the 130-watt ultrasonic processor delivers constant amplitude throughout processing.

  • The sound-abating enclosure has LED interior lighting and a clear polycarbonate door for a full view of the inside.

  • This system can be used with 1.5ml/2ml, 15ml, 16ml, 19ml, and 50ml tubes through its unique carousel rack design. Our Cooling Carousel Tube Rack provides the capability to keep sample tubes within ice, ice-water, or cold beads. Additional carousel racks can be purchased for quicker load time.

  • Up to 20 samples can be processed in one run, or include two rinse positions or set up for every other position to be a rinse position. Typical run time for 20 samples is under 10 minutes. Onboard computing lets the DPS-20 store up to 10 different homogenizing programs in memory, or it can be used in the manual mode for individual sample processing.

  • Onboard computing lets DPS-20 store up to 10 different homogenizing programs in memory, or it can be used in the manual mode for individual sample processing. 

DHS-220 (1).jpg

Specifications


Volume Processing Range: 1.5ml - 50ml tubes


Power Rating: Mechanical 150 Watts / Ultrasonic 130 Watts


RPM Range: 2000-16000


Amplitude Range: 25-100%


Noise rating: 52 dB


Program Mode: 10 Complete running programs can be stored


Weight: 85 pounds

​

Dimensions: 12.75 X 29.5 X 18.25 inch

bottom of page